Hand Pallet Truck
The workhorse of every warehouse — a manual hydraulic pallet truck for moving palletised loads on a level floor.
Pallet trucks, stackers, lift tables, dock equipment, drum handling and goods lifts — supplied with spares and service support across North India.
Material handling equipment earns its money twice: once in throughput, and once in the manual-handling injuries it prevents. The trick is matching the machine to the duty — a fully electric stacker in an operation that stacks four pallets a day is wasted money, and a manual truck in a shed that moves two hundred is a bottleneck.
We supply the full range, hold spares for what we sell, and offer annual repair agreements so equipment is inspected on a schedule rather than fixed after it stops.
The workhorse of every warehouse — a manual hydraulic pallet truck for moving palletised loads on a level floor.
A 3000 kg capacity hand pallet truck for heavier palletised loads, available in two fork widths.
Battery-powered pallet movement for longer runs and higher throughput than a manual truck can sustain.
A pallet truck with a built-in scale — weigh the load where you pick it up instead of walking it to a platform scale.
A pallet truck and a height-adjustable working platform in one — lift the load to a comfortable working height instead…
A 1500 kg hydraulic truck built for reels and rolls — loads that will not sit safely on flat forks.
Hand-hydraulic stacking up to 2 ton and 1600 mm — lift pallets into racking without a forklift.
Powered lift, manual travel — the middle ground between a manual stacker and a fully powered machine.
Powered travel and powered lift, running entirely on battery — for operations stacking all shift.
A fixed, pit-mounted scissor table — platform flush with the floor when lowered, so pallets roll straight on.
A mobile scissor table that goes to the job — 350 to 500 kg capacity on a 900 × 600 mm platform.
Bridges the gap between dock and trailer, so pallet trucks and stackers drive straight into the vehicle.
A portable ramp for sites with no fixed dock — position it, load the truck, move it when you are done.
A goods lift that takes almost no floor space — the mast and platform mount to the wall.
A double mast hydraulic goods lift rated to 2000 kg with approximately 22 feet of travel, built to G+1 through G+4.
A wheeled hydraulic jib crane in 1 ton and 2 ton capacities — lifting where a fixed hoist would be impractical.
Battery-powered lift with manual backup, in 1 ton and 2 ton capacities.
Lift and move drums with a hydraulic pump instead of two people and a lot of risk.
Carry the drum and tip it under control — dispensing without manhandling a full drum.
One machine that lifts the drum, carries it, and tilts it where it needs to be poured.
Send your floor plan, pallet sizes or load requirement and we will come back with a layout and a quotation.
We supply both sides of the warehouse, so racking and equipment can be specified together and installed on the same visit.
View storage racks